Customize Size Spray Booth CE Standard

• After-sales Service: Have
• Warranty: 12 Months
• Type: Spray Booth
• Certification: CE
• Substrate: Steel
• Brand: Bzb
• Model NO.: BZB-8200C
• Coating: Powder Coating
• Airflow Direction: Fully Undershot-type
• Heating Mode: Infrared Ray
• Paint Mist Treatment: Optional
• Condition: New
• Heating System: Itally Riello G20 Diesel Burner
• Total Power: 13kw
• Transport Package: Polyfoam and Cardboards, by Sea, in Container.
• Specification: 6900*4000*2650mm
• Trademark: BZB
• Origin: Guangdong, China
• HS Code: 8419899090

Product Description

Product description:

Our BZB-8200C car spray booth conforms to the Poland standard to choose the middle-end configurations. 

 It is safe and eco-friendly, which is ideal for the car repair factories and common car 4S shops where environmental protection is required. Considering the actual needs of our clientele, this product is designed with many unique details.

Outside size(mm): 7000×5360×3430

Inside size(mm):6900×4000×2650

Front door(mm):3000*2600 (W X H)

Total POWER:13kw

Chamber System:

1. The car spray booth adopts the fire-resistant polystyrene insulation board. The wallboard is 50mm thick, and the outer steel clamping plate is 0.426mm thick. The roof panel is formed by high-quality galvanized sheets.
2. The door frame is made of aluminum alloy profiles by adoption of professional die sinking technology. The door leaf utilizes the square-shaped tempered glass, and it is fixed with aluminum profiles. The door is reinforced with 12 hinges.
3. The frame of the chamber is fixed with galvanized steel sheets.
4. The platform is assembled by galvanized steel sheets and anti-corrosion square steel frame. Additionally, it is configured with the whole floor grille.
5. Three ramps of 900mm wide are made up of anti-skid checkered plates.

Air Supply and Exhaust System:

1. Our car spray booth is assembled with two 3kW YDW series centrifugal type supply fans with air capacity of 21,400m³/h. In addition, a 5.5kW DKF series exhaust fan is utilized with the air capacity of 20,576m³/h. The motor is CE certified.
2. The air port of the air supply and exhaust fans is installed with the explosion-proof brass ring.
3. The air cabinet is formed by coated profiles and galvanized steel sheets.
4. The air is supplied from the back. The exhaust duct is composed of superior-quality galvanized steel plates and professionally made flanges. The air velocity is 0.35m/s, and the air change ratio reaches 320 times per hour.
5. This complete system is equipped with an actuator and a manually-operated louver damper. An electric actuator is used to guarantee the accuracy of both internal and external circulation. A manual damper is installed on the air outlet, so as to adjust the air exhaust volume conveniently.

Air Purification System:

1. The high-quality filter screen is used for the primary filtration of intake air. It can effectively catch the dust particles with the diameter of over 10μm.
2. The highly efficient filter at the top of our car spray booth adopts the fire-resistant filter screen made in the Netherlands. It succeeds in seizing the granules with the diameter of over 4μm.
3. The floor filter is made from glass fiber cotton in Italy. A differential pressure gauge is adopted. The TSP value is no more than 1.4mg/m³.

Heating System:

1. The G20 type burner gives a maximum heating value of 180,000kcal/kg.
2. The exchanger of our car spray booth is made from the SUS304 high-quality stainless steel of 1.5mm thick in use of argon-arc welding technology. It is also configured with the anti-explosion vent.
3. The surface of heat generator has gone through the spraying and coating process. The electric actuator realizes the automatic transfer of paint spraying and curing.
4. The maximum temperature reaches 80ºC, and the heating rate is 5 to 7min at a temperature range from 20 degrees Celsius to 60 degrees Celsius. The rate of oil consumption is 4 to 6kg per unit.

Lighting System:

1. Side of the ceiling: 32pcs 36W led tubes
2. Side of the waist: 16pcs 36W led lamps
3. Light intensity is more than 1000lux.
4. This system adopts the tempered glass and high temperature line.

Electric Control System:

1. This car spray booth comes with an intelligent control system. The whole operation is set to be completed for only once.
2. The main circuit is designed with multi-protection. The entire working process and fault conditions can be automatically displayed.
4. The available functions include the lighting switch, temperature and time settings, room-temperature or constant-temperature paint spraying, paint-curing switch, emergency stop switch, failure alarm, timer, and some others.
5. The electrical equipment conforms to the CE standard.

Exhaust Gas Treatment:

The activated carbon is utilized to filter waste gas, and the exhaust emissions reach the GB16297-1996 national standard. (in accordance with the integrated emission standard of air pollutants)

 

Our Services:

Our engineers can be sent to install the equipment according to your need. If you install the equipment by yourself, we will provide detailed installation drawings.

After installing and debugging, we provide 1-year warranty. Free of charge for equipment repairing is available under warranty. After 1 year, only small amount of charge will be taken.

We will visit our customers regularly to know about our equipment's operation status. In addition, regular remind for equipment maintenance will be given to realize smooth work all the time.

With 20 decades' experience in spray coating industry, we can customize all types of spray coating equipment according to your ideas. In addition, any ideas for optimizing equipment are warmly welcome. We will consistently work hard on improving equipment performance and quality to meet different customer needs.

We are staffed with 20 designers. They have many years of experience in the spray painting industry. All types of spray coating equipment can be custom built, as long as they receive your ideas. Our design team can provide an optimized solution within 2 working days after receiving customer's customization requirements, and can clearly describe product performance, technical parameters and so on.
 

FAQ

 Q: Does BZB have factory ?

A: We have TWO factory ,one in Guangzhou, one in Jiangsu.

 

Q: How many years BZB in this filed?

A: More than 22 years focus on spray booth, powder coating equipment, etc 

 

Q:BZB competitive advantages:

(1)High quality raw materials such as thicker and stronger steel plates for making spray booth cabin.
(2) Advanced equipment for making the booth parts, such as branded CNC machine, auto cutting machine, hole-making machine,etc, making precise and beautiful looked booth parts.
(3) Professional technician team for a scientific design and layout.
(4) Experienced workman ship during the whole manufacturing process.
(5) With two large production base factory, and we are among the top rank manufacturers in China.

 

Q: What kind of Certificate that BZB have?

A: We got CE SGS,TUV,ISO, 9001 Certification of fire protection, etc