Inflatable Auto Hail Repair Spray Booth Container Spray Booth

Product Description

New Design BZB Brand Protable Container Spray Booth

This car spray booth made of container style.It can move to other place easily after simple installation.We can accept different kind of customied Spray Booth for  car or any other industry workpiece.

 

Container Spray Booth Configuration Table
Telescopic room inside size	6954(L)*4200(W)*2458(H)mm
The outer diameter of the entire container	10800(L)* 2438(W)*3400(H)mm(Close size)
The outer diameter of the entire container	10800(L)* 4354(W)*3400(H)mm(Expand Size)
Main door	Front door with 2-leaf, 50mm thick EPS sandwich wall panels, size 2200×2400mm, (with large glass door), 6mm thick square tempered glass observation window, glass size 1150x550mm.
Safety door	2 pieces, one for each side wall, 50mm thick EPS sandwich wall panel, with pressure lock and observation window
Equipment access door	2 units, 50mm thick EPS sandwich insulation wall panel, size  2200x2200mm with pressure locks and cooling holes
Outer frame	Square pipe, I-beam, channel steel, bending parts, corrugated board and other welding machines
Air intake chamber	Full-down draft, the top is a full filter cotton structure, and the part near the cabinet is made with a mesh structure trawl
Basement	Two rows of standard floor grilles (galvanized), three rows of checkered plates (painted) The bottom is sealed, and the platform bracket is welded to form 2000×900(L×W)3. Two pieces slope (with carrying ring), 2000×900 (L×W) painting The ground sealing plate of the back room is a panel checkered plate with heat preservation
Supply and exhaust system	1.The cabinet board is filled with rock wool for heat preservation, white, replacement the filter cotton and the normal inspection surface is movable board (the top frame has a movable board on one side) 2. Air supply: turbo fan DDF-7.5KW, direct drive ABB motor, 415V/50HZ/3PH 3. Exhaust air: TAE-450-7.5KW, belt drive ABB motor, 415V/50HZ/3PH 4,Generator group position: rear side
Inlet and exhaust duct	Equipped with transfer ducts, 2 additional sections of air inlet duct + rain cap; 4 sections of exhaust duct + gravity damper
Filtering system	1. Top filter: flame retardant 560G. 2. Ground filter: glass fiber cotton filter (green). Exhaust filter: simple M-type filter cotton, no filter bag, no environmental protection
Sealing board wall	1.As shown in the three-dimensional diagram, the outside is welded with corrugated board, and the inside of the room and the hot air need to be added with 50mm EPS insulation board 2.Single side corrugated board for non-ventilated part of equipment room
Telescopic part	Manual push-pull telescopic track structure (2 people flexibly push and pull, such as video)
Heating system	304 stainless steel heat exchanger, equipped with G20 diesel burner heating, equipped with 4 smoke pipes and rainhat
Lighting system	Australian external approach, 8 group of lower row lights
Electric control system	Equipped with conventional Australian method electric control system, star-delta start, with pressure gauge, wire color according to Australian requirements, etc.
Power supply	415V,3phase,50HZ	Total power	16.5KW
Remark	Optional gas heating FS20 burner