Specification |
Outside dimension |
4200×2100×2550mm(L×W×H) |
Inside dimension |
4100×1990×2140mm(L×W×H) |
Lighting system |
2×218W LED light (with anti-explosion lamp) |
Pantone wall |
The pantone wall is set on the front side of workbench. |
Air inlet |
3 air inlets are set on the front side for primary filter. |
Personal door |
Size: 2000×800mm(W×H), with panic bar and automatic door closer. |
Observation window |
The front side is equipped with 2 pcs of large observation window. |
Wall |
Bending 0.8 galvanized metal sheet wall |
Top panel |
Single layer 0.8 galvanized plate |
Frame |
10# channel steel integral welding frame. |
Movement equipment |
The bottom of the room has 6 wheels with brake, each one can bear 1T weight |
Workbench cleaning area |
Workbench: 800×650×650mm(L×W×H) |
1. Top lighting: 1×1 pcs 9W LED light(with anti-explosion light). |
2. The exhaust fan adopts 1 set of centrifugal fan, each fan's model and technical parameter as follow: model:DE-190, power: 0.75kw, air capacity: 2000m3/h. |
3. Wasted gas treatment device: fiber glass filter, activated carbon |
4. Ultrasonic spray gun automatic cleaning device. |
5. With cleaning water faucet and some parts of duct. |
6. Rotary button control. The main electrical elements are Schneider brand products, set with lighting, cleaning, emergency stop switch, fault alarm and etc. |
Workbench tool storage |
Workbench: 630×650×650mm(L×W×H) |
1. Empty tool storage (no equipment for the spray gun) |
2. The upper area of the workbench set with cubby-holes. |
3. The nether area of the workbench set with trash recycle barrel. |
Workbench paint testing area |
Workbench: 800×650×650mm(L×W×H) |
1. Top lighting: 1×1 pcs 9W LED light(with anti-explosion light) |
2. The exhaust fan adopts 1 set of centrifugal fan, each fan's model and technical parameter as follow: model:DE-190, power: 0.75kw, air capacity: 2000m3/h. |
3. Wasted gas treatment device: paper filter, fiber glass filter, activated carbon |
4. Set with a pantone paint testing rotation dish. |
5. With 2 pcs of fast joint |
6. The nether area of the workbench set with catcher frame. |
7. Rotary control. The main electrical elements are Schneider brand products, set with lighting, painting, emergency stop switch, fault alarm and etc. |
Workbench drying area |
1. With 1 set of red infrared heater, 1KW/ SET, 1KW in total. It is used for drying the pantone plate. |
2. Rotary control. The main electrical elements are Schneider brand products, set with painting, emergency stop switch, fault alarm and etc. |
Total power |
About 2KW(220V/3P/50HZ) |